When you are mining or building
tunnels, the work is a lot similar. They are both done underground
and the workflow is similar. You drill yourself deeper and deeper and
remove the broken clay, rock and debris via dump trucks. The
equipment that will be involved is some form of drill the rock when
you hit rock, then an excavator, a compact mine loader and then dump
truck. The dump truck is often the articulated type as the space is
limited. As you dig deeper and constantly remove material to the
surface, you will be able to extend the tunnel or the mine.

The whole logistics is often a
challenge as the space is limited and you still need to have the
right equipment in place. You also need space so that the loader can
fill the dump truck with material. The conditions are as tough as
they get especially for the tires, while driving on sharp rocks and
debris. The tire selection is critical, where the correct decision
can increase your productivity and reduce any downtime, while a bad
decision can turn a project to run over budget and cause delays.

All the tires on the equipment that
work in the mines or tunnels should have proper mining
tires. There are special excavator
tires, loader tires and for special drill rig tires. Make sure
that you select the correct tire and dimension for the equipment that
you intend to use the tire on. Since the decision is of utter
importance, you will need to have a good tire selection process.
Using the technical tire manual will help you make the correct
decision based on the equipment and for the conditions that are in
play.

Once you have the correct tires for the
equipment, so that they are able to work in these tough conditions.
You will need to make sure that the tires will stay durable and have
a long service life with minimum downtime. To achieve this you will
need to adhere to strict tire maintenance protocols. If you have a
good tire selection process, but still suffer from high degree of
unscheduled downtime, then you will need to see over your tire
maintenance routines. The tire maintenance is in place to detect any
problems that might arise from wear and tear during usage.

If you detect any problems related to
the tires, you will need to take it serious and make a proper
decision if the tires needs to be replaced or if they can be repaired
or if they can continue to operate. You also need to make sure to
check the tire pressure and monitor the tread depth so that you know
when the tires are worn out and need to be replaced. If all this is
working correctly, you should have a problem free work environment
with good productivity and without delays.

For
more information regarding mining tires for the toughest
conditions, visit: https://www.nokianheavytyres.com/